WORLDWIDE
Home
/
New Product
New Product
SHRUNK IDC
2.0mm slim type single row IDC socket possess compact dimension: only 8.3mm terminated height and 2.5mm thickness after perfectly assembled with 2.0mm flat ribbon cable.
Special terminal design (hooky termination) prevents the risk of inappropriate pull damage and unstable connection.
Available number of contact begins from 2 to 34 positions; standard contact plating is “selective” on material phosphor bronze.
Learn More...
Special terminal design (hooky termination) prevents the risk of inappropriate pull damage and unstable connection.
Available number of contact begins from 2 to 34 positions; standard contact plating is “selective” on material phosphor bronze.
Learn More...
DUAL CONTACT IDC
Low profile IDC socket contains well-designed multi-contact shape terminals and we devote to space-saving effect by its narrow socket body and lower height of cover.
Latest product shrouded header C112 (Straight, 180 degree), C112a (R/A, 90 degree) and C112b (SMT) are developing now as its mating suggestion.
Standard options are: Black PBT insulator, phosphor bronze contact material with selective plating, without strain relief but bar (bump) is optional for customer to choose.
Learn More...
Latest product shrouded header C112 (Straight, 180 degree), C112a (R/A, 90 degree) and C112b (SMT) are developing now as its mating suggestion.
Standard options are: Black PBT insulator, phosphor bronze contact material with selective plating, without strain relief but bar (bump) is optional for customer to choose.
Learn More...
SHROUDED HEADER IDC
With Don Connex 1.27*2.54mm shrouded header IDC type, customer has another choice to make wire to wire connection securely, then disconnect by its labor-saving and protective latch.
Provided with bump slot in the center, this product may fit our socket A07a (IDC type) or A62 (Crimping type) pretty well.
Depending on your requirement, long latch or short latch, with ear or without ear, comes up with totally 4 combinations for making choice.
Learn More...
Provided with bump slot in the center, this product may fit our socket A07a (IDC type) or A62 (Crimping type) pretty well.
Depending on your requirement, long latch or short latch, with ear or without ear, comes up with totally 4 combinations for making choice.
Learn More...
EDGE CARD CRIMP TYPE
Don Connex 2.54mm edge card wire to board connector offers two insulator type, with ear or without ear option to satisfy customer’s requirement.
Housing (color black, material: PBT) should insert A64a 2.54mm phosphor bronze, tin or selective plating terminal (both option is acceptable for basic M.O.Q.): suitable for wire range AWG 28-24, insulation O.D. 0.8-1.5mm.
Min. / max. available position is 10 and 64. Please check engineering drawing below and specification datasheet (pdf) in hyperlink.
Learn More...
Housing (color black, material: PBT) should insert A64a 2.54mm phosphor bronze, tin or selective plating terminal (both option is acceptable for basic M.O.Q.): suitable for wire range AWG 28-24, insulation O.D. 0.8-1.5mm.
Min. / max. available position is 10 and 64. Please check engineering drawing below and specification datasheet (pdf) in hyperlink.
Learn More...
HALF PITCH IDC
Terminated with Don Connex 0.635mm flat ribbon cable, this 1.27*1.27mm (half pitch) IDC socket adopts LCP as insulator material, designed to mates with our male header C57b and C58a, SMT version connector with ejector latch.
The mechanism is reliable and easy for user to unplug from connecting shrouded header. Available number of contact is from 6 to 80 positions.
Learn More...
The mechanism is reliable and easy for user to unplug from connecting shrouded header. Available number of contact is from 6 to 80 positions.
Learn More...
MULTI CONTACT IDC
According to customer's requirement, 2.54mm single row IDC socket may be terminated with 1.27mm or 2.54mm flat ribbon cable; both cables are supplied by our own flat cable extrusion plant.
The socket contains well-designed multi-contact shape terminals and we devote to space-saving effect by its narrow socket body and lower height of cover.
Standard options are: Black Nylon 66 insulator, phosphor bronze contact material with selective plating. Available Number of contact begins from 3 to 36 positions,
Learn More...
The socket contains well-designed multi-contact shape terminals and we devote to space-saving effect by its narrow socket body and lower height of cover.
Standard options are: Black Nylon 66 insulator, phosphor bronze contact material with selective plating. Available Number of contact begins from 3 to 36 positions,
Learn More...
RIBBON TYPE IDC
Don Connex 2.0*2.0mm ribbon type IDC male connector will be terminated with 1.0mm flat ribbon cable.
We offer two mating suggestions as SMT (B58) and straight (180 degree, B59) ribbon type female header.
Regarding special function, its strain relief is optional for customer to order; terminated height will be 12.0mm (without strain relief) or 15.2mm (with strain relief).
Available number of contact: 6, 8, 10, 12, 14, 16, 20, 22, 24, 26, 30, 34, 40, 44, 50 and 68 positions.
Learn More...
We offer two mating suggestions as SMT (B58) and straight (180 degree, B59) ribbon type female header.
Regarding special function, its strain relief is optional for customer to order; terminated height will be 12.0mm (without strain relief) or 15.2mm (with strain relief).
Available number of contact: 6, 8, 10, 12, 14, 16, 20, 22, 24, 26, 30, 34, 40, 44, 50 and 68 positions.
Learn More...
BI-LEVEL IDC TERMINATION
1.27*2.54mm wire-mount IDC socket (A53) & dip plug (A53a) are optional.
Compared with standard fine pitch connector, BI-LEVEL (double layers) IDC termination design increases min.
Insulation Resistance up to 3000MΩ min. and Dielectric Withstanding Voltage up to 500V AC for 1 minute.
More importantly, high performance IDC termination will improve signal integrity.
For IDC socket type customers could consider use strain relief and mating fine pitch shrouded header of Straight (180 degree), R/A (90 degree) or SMT version (C96, C96a and C96b).
Learn More...
Compared with standard fine pitch connector, BI-LEVEL (double layers) IDC termination design increases min.
Insulation Resistance up to 3000MΩ min. and Dielectric Withstanding Voltage up to 500V AC for 1 minute.
More importantly, high performance IDC termination will improve signal integrity.
For IDC socket type customers could consider use strain relief and mating fine pitch shrouded header of Straight (180 degree), R/A (90 degree) or SMT version (C96, C96a and C96b).
Learn More...
EJECTOR HEADER IDC
With Don Connex 1.27*1.27mm (half pitch) shrouded header IDC type, customer has another choice to make wire to wire connection securely, then disconnect by its labor-saving and protective latch.
Provided with bump slot in the center, this product may fit our socket A32 (IDC type) or A52 (Crimping type) pretty well.
Depending on your requirement, with ear or without ear are two functional options for choice.
Learn More...
Provided with bump slot in the center, this product may fit our socket A32 (IDC type) or A52 (Crimping type) pretty well.
Depending on your requirement, with ear or without ear are two functional options for choice.
Learn More...
RAST IDC
With insulator material PBT (A34 edge card type), PC (A67 IDC socket) and phosphor bronze contact, both 2.5mm single row connector (RAST) adopts dual U-Slot and multi-contact terminal design, contributes to excellent performance and reliability.
Besides 2.5mm flat ribbon cable is directly supplied by our own cable extrusion plant, we offer several single row male box headers: C62, C63, C64 and C65 series as mating suggestions (for A67 only).
White color insulator A34 offers tin / selective as standard plating and close-end / feed-through cover type option.
Learn More...
Besides 2.5mm flat ribbon cable is directly supplied by our own cable extrusion plant, we offer several single row male box headers: C62, C63, C64 and C65 series as mating suggestions (for A67 only).
White color insulator A34 offers tin / selective as standard plating and close-end / feed-through cover type option.
Learn More...
FRICTION LOCK IDC
Using LCP as insulator and phosphor bronze contact, 1.27mm (half pitch) single row IDC socket is developed to be terminated with Don Connex 1.27mm 26AWG flat ribbon cable.
The product not only fulfills wire to board (C90~C91, half pitch box header) but also wire to wire connection, including vertical type (A54b) and horizontal type (A55a) box header IDC type.
The friction lock design offers mistake-proofing and basic security about connection.
Learn More...
The product not only fulfills wire to board (C90~C91, half pitch box header) but also wire to wire connection, including vertical type (A54b) and horizontal type (A55a) box header IDC type.
The friction lock design offers mistake-proofing and basic security about connection.
Learn More...
LOCKING RAMP IDC
Using LCP as insulator and phosphor bronze contact, 1.27mm (half pitch) single row IDC socket is developed to be terminated with Don Connex 1.27mm 26AWG flat ribbon cable.
The product not only fulfills wire to board (C90~C91, half pitch box header) but also wire to wire connection, including vertical type (A54b) and horizontal type (A55a) box header IDC type.
The locking ramp design offers mistake-proofing and basic security about connection.
Learn More...
The product not only fulfills wire to board (C90~C91, half pitch box header) but also wire to wire connection, including vertical type (A54b) and horizontal type (A55a) box header IDC type.
The locking ramp design offers mistake-proofing and basic security about connection.
Learn More...